|
Reader-Module Features (Industrial Version) >>> Photos
|
|
| · | Operates with 2 sensors (antennas) e.g. one for entry, one for exit
|
| · | Comes with 2 relays and 2 input lines e.g. to detect door-status switches
|
| · | Internal clock used for timer switch or to restrict entrance times
|
| · | Runs autonomous and needs no permanent connection to a PC server.
|
| High system reliability since it does not depend on any central controller.
|
| · | Records user movement (when went what person through what door), can be read out later on by PC
|
| · | User movement can be forwarded via RS485-bus to PC-server to be displayed by workstations.
|
| · | Option: each reader module can control up to 64 relays when using 4 relay units
|
| · | Comes with many special security functions
|
| Block Diagram
|
|
|
|
| · | contactless TIRIS Transponder (card or keyring tag)
|
| · | Reading distance with Card Transponders max. 200mm (80") with active transponders up to 1.5m (590")
|
| · | Handles up to 2950 transponder in each module.
|
| · | Each transponder code is unique (64 bit) and cannot be changed
|
| · | Special edition: 10m reading distance by using new innovative active transponder technology
|
| · | Built-in antenna or
|
| · | Max 15m detachable Sensors embedded in a light switch housing or exclusive name- / company-plate.
|
| · | Each sensor controls its own assigned relay
|
| · | Two relays with two-way contact (4A / 250V~) minimal required current: 10mA @ 5V
|
|
|
| · | 2 low voltage inputs internally pulled up by resistors to +12V. Are activated by pulling to ground. Allowed voltage range: 0..20V DC
|
| · | uses RS485-Bus (2 signal lines plus ground) max. length 3000m
|
| · | connects all module to PC server
|
| · | up to 200 modules at one branch (number of branches unlimited)
|
| Each branch is terminated by a RS485-, TCP/IP- or Modem-Interface.
|
| · | Recommended cable: CAT-5
|
| · | Used to forward data of detected user movements to PC-server.
|
| · | Used to remote control relays in modules
|
| · | Remote configuration of modules
|
| · | Configuration data is stored non volatile in EEPROM
|
| · | Simple local on-site configuration by using master card (no PC required)
|
| · | On-site configuration by IR remote control (no PC required)
|
| · | 3S KeyManager (software) for a quick and easy set up of entitlements (permission of who may enter when and where) for all modules
|
| · | Configuration data are transferred to / from module via RS485-Bus
|
| · | each module records the latest (max. 3200) granted admissions (person and time), can be read out at a later time by 3S KeyManager
|
| · | requires a master card for on-site configuration
|
| · | Antenna failure will be displayed at the module and can be signaled via RS485-Bus or relay.
|
| · | Provides sabotage contacts to be included in an loop line that alert when module case is opened
|
| · | 12V DC +/-25% ca. 100mA
|
|
|
| · | -10° .. +50° Celsius
|
|
|
| · | robust water proof IP65 case 130 x 80 x 35 mm
|
| · | Air Lock feature: Keeps door #2 locked while door #1 is open
|
| · | Repeated Entry Lock (Anti-Pass-Back): Repeated access with the same transponder is prevented within a programmable period of time.
|
| · | Dual Person Assurance: Access granted only when 2 admitted persons have been identified within a limited period of time.
|
| · | Access Limitation: Entry denied when the number of persons in a room exceeds a predefined amount.
|
| · | Random feature e.g. for random personnel screening etc
|
| · | Integrated Logic-Engine allows for fast realization of customer-specific requirements
|
| · | 3-digit display used during on-site installation and displays operating status.
|
| · | built-in beeper
|
| · | Clock, precision: 70ppm
|
| · | Lithium battery sustains clock operation during power outage for 200..2000 days
|